About Us About Us
Products
Projects Projects
Picture Gallery Picture Gallery
Contact Us Contact Us

ISO 9001:2008







Tech Trade Doors
Roller Shutter Doors Home   Site Map
 
Aircraft Hangar Doors - High Speed Doors - Roller Shutter Doors 
Sectional, Industrial, Cold Storage Doors - Bullet Resistant Products 
Dock Leveller Dock Shelter Scissor Lift - Bi-fold Hydraulic Single Panel Doors - Tranzform Fire
Products - Insulated Rolling Service Doors

Model ESD20


Thermiser® Insulated Rolling Service Doors are recommended for exterior openings where maintaining different temperatures on each side of the door is desirable.

Sizes: 30' wide, 30' high standard construction.
Large Openings
to 38' wide, 40' high consult factory.

Operation: Motors, chain, or hand-crank designs based on size, weight or frequency of operation.

 

Usage: Standard construction is up to 20 cycles per day with High Cycle Construction available for doors expected to be operated more than 20 cycles per day.

Thermiser Benefits:

  • Design Flexibility: Cornell doors are built to order to fit your opening size, operation and option preferences.
  • Insulation: Keeps buildings warm in winter, cool in summer. Closed cell urethane foam insulation provides the lowest thermal conductivity of any material commercially available. The slat has an R-value of 8.0 (U-factor of 0.125) as calculated using the ASHRAE Handbook of Fundamentals.
  • Energy Savings: Upgrading to a Thermiser from a WeatherGard pays for itself in 17 to 23 months, depending on climatic zone.

Perimeter Weathering: Thermiser weatherproofing at bottom bar, guides, and lintel/door header cuts air infiltration rate by 90%. Urethane foam-filled bottom bar and compressible astragal provide seal at sill. Replaceable vinyl weather-stripping at guides forms weather seal along curtain exterior. Lintel mounted nylon brush impedes air flow around coil.

Materials and Finishes: Exterior and interior slats are ASTM A 653 galvanized steel with exclusive GalvaNex™ finish in light gray, SpectraShield® powder coating finish optional. Exterior skin is available in 24, 22, 20 & 18 gauge with combination exterior and interior slats being - 24/24, 22/24, 20/24, 18/24 and 22/22. Exterior and interior skins are also available in 22 gauge 300 series stainless steel with #4 finish and #18 B&S gauge aluminum with mill, clear or color anodized finish. For more information on materials and finishes.

Special Design Applications: Thermiser doors muffle unwanted sound in hospitals, schools, universities, and other institutional, commercial, and industrial buildings. The Thermiser's urethane foam-filled slats and perimeter seals tested at a 26 STC rating compared to a STC 19 for non-insulated doors.




Copyright 2012 TechTrade Doors - Aircraft Hangar Doors, Industrial Doors, Roller Shutter Doors, Cold Storage Doors, Bullet Resistant Products, Dock Leveller Dock Shelter Scissor Lift and Bi-fold Hydraulic Single Panel Doors
Designed and Developed by SmoothDesign.NET
Tech Trade Doors